Self-Levelling Compound
Flows to a flat surface. Quick. Smooth.
Al Salam Tower, Office 15B, Al Barsha, DubaiEvery day, 8am to 10pm
Parquet can only be as flat as the floor beneath it. Uneven screeds cause hollow blocks, squeaks and lifting, and damp screeds cause adhesive failure. We test moisture, grind high spots, level low areas and prime the subfloor before parquet goes down.
Preparation
| Problem | Effect on Parquet | Preparation |
|---|---|---|
| Uneven Screed | Hollow spots and squeaks | Grind and self-level |
| Damp Screed | Adhesive failure, swelling | Dry and moisture barrier |
| Dusty Surface | Weak bond | Clean and prime |
| Old Tiles | Height and bond issues | Remove or level over |
New screeds in Dubai buildings can hold moisture for weeks. Laying parquet too soon traps that moisture under the timber. Moisture testing before installation prevents costly failures.
Flatness tolerances for parquet are tight. Self-levelling compounds give a smooth, flat base quickly.
For installation, see parquet installation. For general floor levelling, see floor levelling, and for loose blocks, loose block re-fixing.
Drying
Levelling compounds need drying time before parquet is laid.
Over Tiles
Parquet can sometimes go over old tiles after preparation.
Flat Base
Parquet lies flat and stays bonded only on a good base.
We test moisture, grind, level and prime subfloors.
Process
Moisture and flatness are measured across the room.
High spots are ground and cracks repaired.
Self-levelling compound is poured where needed.
A primer is applied so adhesive bonds properly.
Yes. We find and stop the moisture source, lift swollen or lifted blocks, dry the subfloor, replace damaged timber and refinish so the repair blends in.
Yes. We install herringbone, chevron, basket weave and other patterns, with borders and inlays, and stain or oil the floor to the colour you choose.
Most parquet can be restored. Loose blocks are re-fixed, damaged ones replaced, then the floor is sanded back to fresh timber, gaps filled and resealed with lacquer or oil. Engineered parquet can usually be sanded a few times depending on its wear layer.
Parquet repair visits start from AED 300. Sanding and refinishing starts from about AED 35 per square metre, and new parquet installation from about AED 150 per square metre supplied and fitted. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
Pricing Guide
Preparation is priced per square metre.
| Job | Starting Price* | What Affects the Price |
|---|---|---|
| Self-Levelling | From AED 30*/m² | Up to a few mm. |
| Grinding | From AED 15*/m² | High spots. |
| Moisture Barrier | Quoted per m² | Damp screeds. |
| Moisture Testing | Included | Before work. |
*Prices shown are starting guides only. They vary and can change depending on your requirements, the size of the job, the surface, the materials and access to your building. You agree the final price before any work begins.
Tools and Materials
Flows to a flat surface. Quick. Smooth.
Removes high spots. Flat base. Clean.
Protects parquet from damp screeds. Lasting. Safe.
Improves adhesive bond. Strong. Reliable.
Based in Al Barsha since 2014, we work across every Dubai community with trade-specialist technicians and a workmanship guarantee on every job.
Moisture and flatness measured. No guesswork. Lasting floors.
Ground and levelled. No hollows. Quiet.
Primed surfaces. Adhesive holds. Reliable.
Over tiles or remove, we advise honestly. Right choice. Fair.
We prepare subfloors across Dubai.
Based at Al Salam Tower, Office 15B, Al Barsha First
Dubai Marina, JBR, JLT, Palm Jumeirah, Al Sufouh, Discovery Gardens, Al Furjan
Downtown Dubai, Business Bay, DIFC, Jumeirah, Umm Suqeim, Al Barsha, Tecom, The Greens
Arabian Ranches, Dubai Hills Estate, Emirates Hills, The Springs, The Meadows, Damac Hills, Motor City, Sports City, JVC, JVT, Town Square
Deira, Bur Dubai, Mirdif, Al Warqa, Silicon Oasis, Al Qusais
We will test and prepare the subfloor first.