Extra Joists and Noggins
Added between existing supports to shorten spans. Bounce reduces straight away. Fixed with structural screws.
AED 80*/m²
Subfloor Reinforcement and Preparation in Dubai
Raised timber platforms, mezzanines, stage floors and older villa subfloors can bounce or creak underfoot, which cracks tiles and breaks click flooring. We add supports, glue and screw down loose panels and lay new plywood, so the subfloor is stiff and ready for its new finish.
- Raised platforms
- Mezzanines
- Timber subfloors
- Stage floors
Supports
Solid Underfoot
Timber Subfloors Strengthened
A stiff subfloor protects every finish above it.
We add supports, fix panels and overlay plywood.
- Glued and screwed
- Plywood
- Checked
Methods
How We Stiffen Subfloors
Glue and Screw Panels
Loose panels are glued and screwed to joists. Creaks stop. The floor acts as one surface.
New Plywood Overlay
A layer of plywood is screwed down over old boards. It spreads loads. It gives a flat base.
Cement Board for Tiles
Tiles on timber need a rigid backer board. It stops grout cracking. It resists moisture.
Process
Subfloor Preparation Steps
- Step 1
Inspect
We lift a panel to check joist size, spacing and condition.
- Step 2
Reinforce
Supports are added and loose panels fixed down.
- Step 3
Overlay
Plywood or backer board is laid and screwed in a grid.
- Step 4
Check
The floor is walked and checked for bounce and flatness.
Stiff Floors Protect New Finishes
Tiles and stone crack if the floor below flexes even slightly. Click flooring joints open and break. A stiff subfloor is the first step for any of them.
Most villa and apartment floors in Dubai are concrete. Timber subfloors are usually raised platforms, mezzanines or older extensions.
For concrete bases, see subfloor levelling. For parquet, see parquet subfloor preparation, and for stairs and platforms, custom carpentry.
Pricing Guide
Subfloor Reinforcement Cost in Dubai
Priced per square metre after inspection.
Reinforcement
From AED 80*/m²
Supports and fixing.
Plywood Overlay
From AED 60*/m²
Supplied and fixed.
Cement Board
From AED 70*/m²
For tiles.
Inspection
From AED 150*
Credited on booking.
*Prices shown are starting guides only. They vary and can change depending on your requirements, the size of the job, the surface, the materials and access to your building. You agree the final price before any work begins.
- Subfloor inspected
- Joists checked
- Supports added
- Panels glued and screwed
- Overlay laid
- Screwed in a grid
- Bounce tested
- Clean-up
Tools and Materials
Tools, Materials and Products We Use for Subfloor Reinforcement
Structural Plywood
Stiff, flat overlay. Spreads loads. Reliable.
Cement Backer Board
Rigid base for tiles. Moisture resistant. Strong.
Construction Adhesive
Bonds panels to joists. Stops creaks. Lasting.
Flooring Screws
Hold panels tight. No squeaks. Secure.
Why Choose Wamtech Services for Subfloor Reinforcement in Dubai
Based in Al Barsha since 2014, we work across every Dubai community with trade-specialist technicians and a workmanship guarantee on every job.
Inspected
We look underneath first. Right fix. No guessing.
Stiff Floor
No bounce. Finishes last. Comfortable.
Carpentry Skills
Joists and platforms handled. Experienced. Neat.
Ready for Anything
Tiles, vinyl or wood above. Flexible. Solid.
Subfloor Reinforcement and Preparation: FAQs
How Flat Does a Floor Need to Be for New Flooring?
Most click flooring needs no more than about 3 mm of variation over 2 metres. More than that and boards flex, click joints break and floors sound hollow, so we level first.
How Much Does Flooring Installation Cost in Dubai?
Laminate and SPC vinyl installation starts from AED 25 per square metre for labour, and from about AED 70 per square metre supplied and fitted. Levelling and skirting are quoted separately when needed. Prices vary and can change depending on your exact requirements, the materials and access to the property, so the final price is confirmed after we see photos or visit.
How Long Does Flooring Installation Take?
A typical apartment bedroom is fitted in a day. A full two-bedroom apartment usually takes two to three days, plus drying time if the floor needs levelling first.
Do You Cover All Areas of Dubai?
Yes. We work across Dubai, from Dubai Marina, JLT and Palm Jumeirah to Al Barsha, Mirdif, Arabian Ranches, Dubai Hills and Silicon Oasis.
More Floor Levelling Services in Dubai
View All Floor Levelling ServicesSubfloor Reinforcement Across Dubai
We strengthen subfloors across Dubai.
Based at Al Salam Tower, Office 15B, Al Barsha First
New Dubai and the Coast
Dubai Marina, JBR, JLT, Palm Jumeirah, Al Sufouh, Discovery Gardens, Al Furjan
Central Dubai
Downtown Dubai, Business Bay, DIFC, Jumeirah, Umm Suqeim, Al Barsha, Tecom, The Greens
Villa Communities
Arabian Ranches, Dubai Hills Estate, Emirates Hills, The Springs, The Meadows, Damac Hills, Motor City, Sports City, JVC, JVT, Town Square
Old Dubai and East
Deira, Bur Dubai, Mirdif, Al Warqa, Silicon Oasis, Al Qusais
Bouncy Floor?
Send photos and we will inspect and quote.